Sample Text
AEROCOMPACT DESIGN SOFTWARE
AEROCOMPACT S is an aerodynamic south-oriented racking solution for mounting framed modules on flat roofs with 5°, 10° and 15° mounting tilts.
TESTED on the HIGHEST STANDARDS
This patent pending system is wind-tunnel tested with the newest standards, is TUV certified to UL 2703, and has a 25-year limited product warranty. Aerocompact S has also been TUV load tested according to IEC 61215 including module flash-testing and fire-testing according to UL 1703 standards.
AEROCOMPACT S is delivered pre-assembled, including newly developed building protection mats – with long-term durability testing.
DOWNLOADS
Sample Text
TECHNICAL DETAILS
Mounting Tilt:
AEROCOMPACT S: 5°, 10°, 15°
Inter-Row Spacing:
AEROCOMPACT S 5 (18°): 13.2 inch (335 mmm)
AEROCOMPACT S 5 (30°): 7 inch (178 mm)
AEROCOMPACT S 10 (18°): 20.7 inch mm (526 mm)
AEROCOMPACT S 10 (25°): 15 inch (380 mm)
AEROCOMPACT S 15 (18°): 31 inch (789 mm)
AEROCOMPACT S 15 (25°): 22.5 inch(571 mm)
AEROCOMPACT+ (18°): 18.3 inch(464 mm)
Min. Array Size:
AEROCOMPACT S: 2 rows with 3 modules / 3 rows with 2 modules
Roof Edge Zone:
Roof areas F and G can be used
Module Dimensions:
37.4 – 41.3 inch x 61.1 – 81.9 inch (width – length)
Max. Roof Slope:
5 Degree
Roof Height:
max. 25 m
Windload:
up to 2.4 KN/m2
(Design load as a load combination of dead load and wind suction)
Snowload:
AEROCOMPACT Standard up to 2.4 KN/m2
AEROCOMPACT Alpin up to 4.4 KN/m2
(Design load as a load combination of dead load, wind and snow pressure)
Module approval:
Please request approved module list from the module manufacturer or Aerocompact
Materials:
Supporting materials made of aluminum EN AW 6060 T64, module-clamps aluminum EN AW 6063 T66, stainless steel screws, wind-deflector galvanized steel
Shipping:
approx. 40 KW per pallet, 700 KW per truckload
System Requirement:
Proof of static load capacity of the roof and the insulation needs to be provided by customer. General terms / warranty conditions and usage agreement apply.
ARRAY ASSEMBLY
Sample Text